The RB711G-5HnD is a small CPE type RouterBOARD 5GHz wireless router with an integrated wireless card. It has two antenna connectors for using in dual chain setups, and a Gigabit Ethernet port - the perfect device for Nv2!
The integrated 5GHz 802.11a/n wireless card is capable of up to 25dBm! It has built in 16kV ESD protection on both the RF and Ethernet ports.
| CPU | Atheros AR7241 400MHz network processor |
| Memory | 32 or 64 MB DDR SDRAM onboard memory |
| Data storage | 32MB onboard NAND memory chip |
| Ethernet | One Gigabit Ethernet port with Auto-MDI/X |
| Wireless | Built in 5GHz AR9283 802.11a/n card 2 MMCX connectors |
| Extras | Reset switch, Beeper |
| LEDs | Power, NAND activity, 5 user LEDs |
| Power options | PoE: 8-30V DC on Ether1 (Requires RBGPOE PoE injector for Gigabit mode, with regular PoE injector, will work in 10/100 mode) |
| Dimensions | 10.5 cm x 10.5 cm (4.13 in x 4.13 in) Weight: 67g |
| Power consumption | Up to 4.5W at 18V full load (0.245A) |
| Operating System | MikroTik RouterOS, Level3 or Level4 license |
| RX sensitivity |
802.11a: –92 dBm @ 6Mbps to -76 dBm @ 54 Mbps 802.11n: –92 dBm @ MCS0 to –73 dBm @ MCS7 40MHz |
| TX power (2 chains) |
802.11a: 25dBm @ 6Mbps to 22dBm @ 54 Mbps 802.11n: 25dBm @ MCS0 to 18dBm @ MCS7 |
| Modulations |
OFDM: BPSK, QPSK, 16 QAM, 64QAM DSSS: DBPSK, DQPSK, CCK |