PowerDsine 9001G 40W TW-POE-9001G-40/SP/AC-E
Microsemi’s PD-9001G-40/SP is a single-port solution for remote powering of current as well as emerging high power applications, as well asproviding Surge Protection functionality optimal for the installation of outdoor PDs.
The PD-9000G-40/SP Family is designed specifically to power IEEE 802.11n and IEEE 802.3at access points, pan-tilt-zoom (PTZ) and dome cameras, IP videophones, thin clients and other high power Ethernet end terminals, 40W of power and is also backward compatible and safe to use with any 802.3af terminal such as VoIP phones, IP cameras and wireless LAN access points.
It can power both existing 10/100Base-T devices and emerging wireless gigabit devices such as WI-MAX and wireless IEEE 802.11n access points.
With the midspan’s plug-and-play installation, they are easily and cost effectively implemented leveraging an existing Ethernet infrastructure while at the same time providing the assurance of a future proof network.
- Up to 40W of power on 2-pairs
- Surge protection according to GR 1089
- IEEE 802.3at compliant with 2-event classification
- Cisco and legacy PoE support
- Plug-and-play installation
- Guaranteed uptime
|No. of Ports||1|
|Pass Through Data Rates||10/100/1000 Mbps|
|Power over Ethernet Output||Pin Assignment and Polarity: 4/5 (+), 7/8 (–) Output Power Voltage: 55Vdc User Port Power: 40Watts|
|Input Power Requirements||
AC Input Voltage: 100 to 240 Vac AC Input Current: 0.8A @100-240 Vac AC Frequency: 50 to 60 Hz
|Dimensions||87.9 mm (W) x 43 mm (H) x 166 mm (L) 3.46 in. x 1.68 in. x 6.Mikrotik Technical Support in|
|Weight||.881 lbs (400g)|
AC Power (Yellow) Channel Power (Green)
|Connectors||Shielded RJ-45, EIA 568A and 568B|
|Regulatory Compliance||IEEE 802.3at (PoE, PoH Type 1) RoHS Compliant, WEEE Compliant, CE|
|Electromagnetic Emissions & Immunity||FCC Part 15, Class B
EN 55022 Class B (Emissions)
EN 55024 (Immunity), VCCI
|Surge Protection||Meets Surge Protection as specified in GR-1089-Core Critera B: ±1000V/100A @ 10/1000 Waveform ±2500V/500A @ 2/10 Waveform ±1000V/25A @ 10/360 Waveform|
|Safety Approvals||UL/cUL Per EN 60950-1
GS Mark Per EN 60950-1
Cutting Power Consumption with Energy Efficient PoE (EEPoE)
Understanding IEEE802.3at PoEPlus
Installing PoE for Outdoor Deployment
Switch vs Midspan
PoE Midspans Harness Universal Power for Your Network